How To Change Light Fixture On Ceiling

How to Change Light Fixture on Ceiling

Changing the light fixture on a ceiling can be a simple task that can be completed in a few minutes. However, if you are not comfortable working with electricity, it is best to hire a qualified electrician.

Before you start, you will need to gather the following tools and materials:

Tools

Phillips head screwdriver
Flathead screwdriver
Wire cutters
Electrical tape
Ladder

Materials

New light fixture
Wire nuts
Ceiling fan canopy

Once you have gathered your tools and materials, you can follow these steps to change the light fixture on your ceiling:

Step 1: Turn off the power to the light fixture.

Go to the circuit breaker panel and turn off the breaker that controls the light fixture.

Step 2: Remove the old light fixture.

Use a Phillips head screwdriver to remove the screws that hold the light fixture in place.
Carefully pull the light fixture down from the ceiling.
Disconnect the wires from the old light fixture by unscrewing the wire nuts.

Step 3: Install the new light fixture.

Connect the wires from the new light fixture to the wires from the ceiling by screwing on the wire nuts.
Push the new light fixture up into the ceiling and secure it with the screws.

Step 4: Turn on the power to the light fixture.

Go to the circuit breaker panel and turn on the breaker that controls the light fixture.

Step 5: Check the light fixture.

Turn on the light fixture to make sure that it is working properly.

Here are some additional tips for changing a light fixture on a ceiling:

If you are not sure which circuit breaker controls the light fixture, you can turn off the main breaker to your home.
Be careful not to touch the bare wires when you are disconnecting or connecting them.
If you are having trouble changing the light fixture, you can always call a qualified electrician for help.
Be aware of the thickness and weight of the new light fixture. You may need to reinforce the ceiling junction box if the new fixture is heavier than the old one.
Do not overtighten the screws when securing the light fixture to the ceiling.
If you are changing a light fixture in a bathroom, make sure that the new fixture is rated for use in damp locations.