Ceiling Fan Globe Replacement With 2 Holes

Replacing a ceiling fan globe with 2 holes is a straightforward task that can be completed in a few minutes. Here are the steps on how to do it:

Step 1: Gather your materials. You will need a new ceiling fan globe, a screwdriver, and a ladder.

Step 2: Turn off the power to the ceiling fan. This can be done by turning off the circuit breaker or fuse that powers the fan.

Step 3: Remove the old ceiling fan globe. Use a screwdriver to remove the screws that hold the globe in place. Once the screws are removed, gently pull the globe straight down to remove it.

Step 4: Install the new ceiling fan globe. Align the holes in the new globe with the holes in the ceiling fan. Then, gently push the globe up into place until it snaps into position.

Step 5: Secure the new ceiling fan globe. Use the screws that you removed in Step 3 to secure the new globe in place. Tighten the screws until the globe is snug.

Step 6: Turn on the power to the ceiling fan. Once the new globe is installed, turn on the power to the ceiling fan and test the light to make sure that it is working properly.

Here are some additional tips for replacing a ceiling fan globe with 2 holes:

If the globe is difficult to remove, you can try using a pair of pliers to gently pry it loose.
Be careful not to overtighten the screws when securing the new globe in place.
If you are replacing a globe on a high ceiling fan, you may need to use a ladder to reach it.
It is a good idea to replace the ceiling fan globe every few years to keep it looking its best.