Installing Shiplap On A Ceiling

Shiplap is a type of wooden siding that is installed horizontally with a slight overlap. It is a popular choice for ceilings because it is easy to install and gives the room a rustic, cottage-chic look. If you are looking to add some character to your ceiling, shiplap is a great option.

Materials You Will Need

Shiplap boards
Nails or screws
Nail gun or drill
Chalk line
Level
Measuring tape
Safety glasses
Dust mask

Safety First

Before you begin, put on your safety glasses and dust mask. Shiplap can be dusty, so it is important to protect your eyes and lungs. Also, be sure to work in a well-ventilated area.

Planning and Layout

The first step is to plan the layout of your shiplap. Decide which direction you want the boards to run and how much overlap you want. Once you have a plan, use a chalk line to mark the starting point for your first board.

Installing the Shiplap

Start by nailing or screwing the first board into place. Be sure to use a level to make sure the board is straight. Once the first board is in place, continue installing the remaining boards, overlapping them slightly as you go. Use a nail gun or drill to secure the boards into place.

Finishing Touches

Once all of the shiplap is installed, you can add some finishing touches. If you want, you can paint or stain the shiplap to match your décor. You can also add trim around the edges of the ceiling to give it a more polished look.

Tips

If you are installing shiplap on a ceiling that is higher than 8 feet, you will need to use a scaffold or ladder to reach the top.
Be sure to wear gloves when handling shiplap, as the edges can be sharp.
If you are not comfortable installing shiplap yourself, you can hire a professional to do it for you.